BUTLY EXTRUDER

BUTYL MACHINE TECHNICAL SPECIFICATIONS

• It is used to set up butyl and band to edges of aluminum profiles, which are located between thermally insulated glass.

• User interface with touch screen
• Utility to change automatic and mechanic adjustments
• Warning signals that simplify operations and prevent malfunctions.
• Low energy consumptions thanks to special hydraulic unit.
• High speed
• Quick warm up system
• Hydraulic cylinder design
• Able to use standard 7 kg butyl block
• Zero workmanship loss due it is able to be warmed up in 20 minutes and start to work.
• Butyl exit nozzles with width ability set up from 6mm up to 24m and adjustable height under pressure
• Safe operation due to safety system, which is included in PLC control unit.
• User interface with touch screen
• Lath locking wheels at directions of lath entry and exit.
• Automatic adjustment for holder rising and lowering and butyl start and end points during speed changes.
• Neat and stabile butyl injection due to sensitive hydraulic system
• Availability to start to operate at desired hour.
• Sensitive temperature measurement thanks to PID temperature control system.
• Separate temperature controls for reservoir and butyl exit nozzles
• Thanks to insulated butyl reservoir and nozzles, which have heat-sealing property, minimum time loss during material
change.
• Energy saving at rate of 2,5 kw per hour through air pressure powered hydraulic pump
• Automatic shut down feature.

BUTLY EXTRUDER (LOGO)

• Reservoir capacity of 7 kg
• Automatic or manual operation modes
• Adjustable operating temperature depending on the substrate material
• Timer for automatic operation svvitching on/off
• Adjustable material flow rate
• Butyling of the moulding between 6 mm to 24 mm
• Ease of material filling
• Moulding holding rollers at the entry
• Safety system for hot and oold operation
• Adjustable butyl suction height
• Coated with static deposition painting against the corrosion and scratches
• Electric system conforming to outstanding safety rules

[/safir_list]

• Optional butlylling of circular moulding
• Optional adjustable driver speed